steel ingot

steel ingot

美 　英

• na.钢锭
• 网络菲律宾求购钢锭；钢坯

英汉解释

na.

1. 钢锭,钢块

例句

Inspecting raw materials: Making inspection to the ingredients and specification of alloy steel ingot before processing.

原料检验：对合金钢钢锭的成分、规格在加工之前进行检验。

total elongation and fish-tail change with liquid core rate of steel ingot; join mark and splits etc. produced surface of the rolled metal.

轧件的总延伸和鱼尾量随轧件的液芯率而变化，在轧件表面产生交接痕及裂纹等。

Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron and Wrought Iron.

碳素钢，低合金钢，硅电炉钢，铁锭和熟铁的化学分析的测试方法。

This steel ingot is too large to be moved into the furnace.

这块钢锭太大，不能送进炉内。

To obtain the high-quality forged steel ingot, it must control the ingot solidification process.

要获得锻造所需的优质钢锭，就必须控制钢锭的凝固过程。

Increasing the utilization ratio of the steel ingot is an important way to reduce the forging cost.

提高钢锭的利用率是降低锻件成本的重要途径之一。

Effect of ultrasonic treatment on the porosity of high carbon steel ingot was investigated.

研究了超声处理对高碳钢铸锭内气孔的影响。

The internal defects of steel ingot have bigger influence to internal quality of block.

钢锭内部缺陷对大截面模块内部质量的影响较大。

And a large steel ingot casting simulation of the thermal environment to study the changes in coating high temperature strength.

并对大型钢锭浇注的热环境进行模拟，考察涂料高温强度的变化情况。

A Study of Relationship Between Steel Ingot Oxidation and Air-Fuel Ratio

钢锭氧化烧损与空燃比的关系研究

Numerical Simulation of Temperature Field in Steel Ingot Solidification Process

锻造用钢锭凝固过程温度场数值模拟

Phase transformation of chill layer of low carbon steel ingot and its effect on hot charging crack

低碳钢钢锭急冷层的相变及其对红送裂纹的影响

Numerical Simulation of the Process of Vertical and Directional Solidification of Large-size Steel Ingot

大型垂直定向凝固钢锭凝固过程数值模拟

The designing and realizing of steel ingot in production management information system

钢锭在制品管理信息系统的设计与实现

The Research on the Quality Improvement of the Medium Mn and Low Si Steel Ingot Mold

提高中锰低硅钢锭模质量研究

The steel ingot rolling becomes the steel products, wants water used cooling;

钢锭轧制成钢材，要用水冷却；

continue to pig iron, iron alloy steel ingot, billet, and added value relatively low wire threaded steel 10% to 25% of export duties;

继续对生铁、铁合金、钢坯、钢锭和附加值比较低的线材、螺纹钢征收10%至25%的出口关税；

Formation Mechanism on Hot Charging Process Crack of Low Alloy Steel Ingot

低合金钢钢锭红送裂纹的形成机理

Finite Element; Thermal Stress; Steel ingot Mould;

热光弹；有限元；热应力；钢锭模；

Study on the Regulating Technology of the Ratio of Air to Fuel Based on Steel Ingot Oxidizing

基于钢锭氧化的空燃比调节技术研究

Sending a heavy steel ingot in hot state

大钢锭热送

The incising technique for large steel ingot

大型钢钢锭切割加工工艺技术